Get Quote

Luggage Vibration Impact Tester GT-LC02

Application:

This Luggage Vibration Impact Tester applies for luggage vibrate impact resistant test, like handbag, luggage, golf bag, stitch parts. Test method is put some load on, impact 30times in a min. with the distance of 1 inch, test time can set from 0-999999 times, while in many times, the machine will stop by its own and the specimen dropped off, this can be the reference data for improvement.

 

 

Inquire Now

Product Introduction

Luggage Vibration Impact Tester applies for luggage vibrate impact resistant test, like handbag, luggage, golf bag, stitch parts.

Features:

  • Our company develops our own control system with times setting and counting functions. There’s starting, stopping, pausing, counting and clearing functions on the test control panel.
    It can count from 0 to 999,999 times.
  • The Suitcase Vibration Impact Tester stops automatically when the setting times are reached or when the backpack strap is damaged.
  • The control system controls cylinders going up and down. When reaching the lower end, the control system induces the release of electromagnets near the lower part of the switch. Making free impact under the action of gravity, impact to the spring end is the force of the spring, in repeated oscillation and the cylinder drive the electromagnet to the lower end repeated the above actions, the impact speed is 20±2 times per minute.

Standards:
QB/T 2922-2018, QB/T 5083-2018- from September, QB/T 1333 – 2018

Luggage Vibration Impact Tester Key Specifications

Model

GT-LC02

Control system

PLC and touch screen (using man-machine interface control system, easy to operate, power cut and save function)

Counting

0-999 999 times, the equipment will automatically shutdown when it reaches the set number of times, setting the number of impact in the human-machine interface.

Driving Cylinder

100 KG weight Cylinder, AINTAC Cylinder

Sample Clamp

lower suction cup, upper damping rubber block, impact rod, the total weight of common clamps are (8.1+0.2) kg.

Impact Stroke

The impact device can move up and down, and the one-way stroke is (150 ±5) mm. The stroke is set on the basis of the impact device with an additional load of 30 kg.

 

Impact Weight

The stroke is set on the basis of the additional load of the impact device of 30 kg.              

Impact Spring

Spring constant (17.54±0.88) Nmm, spring section is rectangular (8.5 mm×4.2 mm) length (165±5) mm, outer diameter (44.5±0.5) mm, inner diameter (28.0 ±0.5) mm, effective number (17 soil 0.5) laps.

Damping Block

Both end of damping spring is equipped with a circular damping rubber block with an outer diameter of 100±5 mm, a height of 30±3 mm, and a diameter of a central hole of 22±2 mm. The main material is thermoplastic polyurethane, and the hardness is Shore A 85±3. The center hole of the lower damping block should ensure the impact rod passes freely and smoothly.

Backpack Clamp

The quality of backpack belt clamp is (1.35±0:05) kg.

Sample Fixing Materials

bovine split-layer section napped leather, thickness 1.5 mm~2.0 mm, width (100 ± 5) mm, softness 1.5 mm~2.5 mm (test aperture 25 mm).

 

Gas Source

6KG/CM2

Power supply

220v, 50/60HZ

Weight

500 kg